CAD/CAE Design Technologie für Zuverlässigkeit und Qualität

Konferenz und Journal

System-Level Modeling and Simulation-Based Approach to Risk Assessment for Space Systems
Kaname Kawatsu
2018 Annual Reliability and Maintainability Symposium (RAMS)
PHM by Using Multi-Physics System-Level Modeling and Simulation for EMAs of Liquid Rocket Engine
Kaname Kawatsu
2019 IEEE Aerospace Conference
Design Considerations in MgB2-Based Superconducting Coils for Use in Saturated-Core Fault Current Limiters
J. C. Knott, P. A. Comminsa, J. W. Moscrop, S. X. Dou
IEEE Transactions on Applied Superconductivity. Volume:24, Issue: 5, Oct. 2014
Primary and tertiary creep properties of eutectic SnAg3.8Cu0.7 in bulk specimens
R. Metasch, J. C. Boareto, M. Roellig, S. Wiese, K. -J. Wolter
10th International Conference on Thermal, Mechanical and Multi-Physics simulation and Experiments in Microelectronics and Microsystems, 2009. EuroSimE 2009.
Energy saving measures on pneumatic drive systems
J. Hepke, J. Weber
The 13th Scandinavian International Conference on Fluid Power, SICFP2013, June 3-5, 2013, Linköping, Sweden
Hydraulic Die Cushions in Deep Drawing Presses: Analysis and Optimization Using Coupled Simulation
T. Schulze, J. Weber, K. Großmann, L. Penter and C. Schenke
ASME/BATH 2015 Symposium on Fluid Power and Motion Control. Chicago-USA, October 12–14, 2015
Design optimization of large gap single axis thrust magnetic bearing actuator
Dash S.K., Swarup K.S., Rajan K.K.
International Journal of Applied Electromagnetics and Mechanics, vol. 47, no. 3, pp. 661-680, 2015
Magnetic Switch Mechanism for Circuit Breakers
E. Bindl, H. Neubert, J. Lienig, A. Kraetzschmar, S. Beyer
Proceedings of ICEC 2014. The 27th International Conference on Electrical Contacts
Equivalent Air Spring Suspension Model for Quarter-Passive Model of Passenger Vehicles
Haider J. Abid, Jie Chen, and Ameen A. Nassar
International Scholarly Research Notices. Volume 2015 (2015), Article ID 974020, 6 pages
Probabilistische Simulation dynamischer Systeme am Beispiel eines Induktionsmotors
T-Q. Pham, A. Kamusella
SIMPEP Kongress 17./18. September 2014 in Koblenz/Lahnstein
Design Optimization of Single Axis Thrust Magnetic Bearing Actuator
S K Dash and Swarup K. S
The Journal of CPRI. Vol. 10, No. 1, March 2014
Optimization of an Electromagnetic Linear Actuator Using a Network and a Finite Element Model
H. Neubert, A. Kamusella, J. Lienig
Proc. of SPIE, Vol 7977, Active and Passive Smart Structures and Integrated Systems 2011, San Diego, CA, pp. 7977 21, March 2011.
Uncertainty-Based Design Optimization of MEMS/NEMS
Holger Neubert
In Gerald Gerlach, Klaus Wolter (Eds.): Bio and Nano Packaging Techniques for Electron Devices - Advances in Electronic Device Packaging 123. Springer 2012. pp. 119-140
Numerische Optimierung der Verteilung von Dämpfungsbelägen
Clarissa Schaal
Master-Thesis, TU Darmstadt 2012
Development of a Bendable Permanent-Magnet Tubular Linear Motor
Urban, C.; Gunther, R.; Nagel, T.; Richter, R.; Witt, R.
IEEE Transactions on Magnetics, Volume: PP, Issue: 99, 2012
Meta-Modellierung zur Gewinnung von Ersatzmodellen aus Messdaten und FE-Analysen als Bausteine für die Multidomain-Simulation
The-Quan Pham, Alfred Kamusella
FVA Kongress für Simulation im Produktentstehungsprozess, 29-30 September 2011 Veitshöchheim
Zuverlässigkeitsbewertung mechatronischer Systeme durch multidisziplinärer und probabilistischer Simulation
The-Quan Pham, Holger Neubert, Alfred Kamusella
3.DVM-Tagung "Zuverlässigkeit mechatronischer und adaptronischer Systeme", 14.-15. April 2010 in Darmstadt
Kostengünstige Entwicklung von Qualitätsprodukten durch probabilistische Simulation und Optimierung
The-Quan Pham, Alfred Kamusella
FVA SimPEP-Kongress, 18.-19. Juni 2009 in Veitshöchheim
Multidisziplinäre Analyse und Optimierung eines elektromagnetischen Ventilantriebs mit Hilfe gekoppelter FE- und Netzwerksimulationen
Daniel Schlabe, Thomas Bödrich, The-Quan Pham, Thomas Ehre
VDI-Tagung Mechatronik, 12.-13. Mai 2009 in Wiesloch
Zuverlässigkeitsanalyse und zuverlässigkeitsbasierte Optimierung mit probabilistischen Methoden am Beispiel eines Magnetantriebes
The-Quan Pham, Alfred Kamusella
VDI-Tagung Technische Zuverlässigkeit, 29.-30. April 2009 in Leonberg
Sensitivitätsbewertung adaptronischer Systeme bezüglich streuender Konstruktions- und Umgebungsparameter
Soong-Oh Han, Kai Wolf, Holger Hanselka, Thilo Bein
VDI-Tagung Technische Zuverlässigkeit, 29.-30. April 2009 in Leonberg
Vergleich einer experimentellen und simulationsbasierten Sensitivitätsanalyse einer adaptiven Ölwanne
Y. Li, S-O. Han, T. Pfeiffer
3.DVM-Tagung "Zuverlässigkeit mechatronischer und adaptronischer Systeme", 14.-15. April 2010 in Darmstadt
Auto-Extraction of Modelica Code from Finite Element Analysis or Measurement Data
The-Quan Pham, Alfred Kamusella, Holger Neubert
8th International Modelica Conference, 20-22 March 2011 in Dresden
Robust and Reliability-Based Design Optimization of Electromagnetic Actuators Using Heterogeneous Modeling with COMSOL Multiphysics and Dynamic Network Models
Holger Neubert, Alfred Kamusella, The-Quan Pham
The European COMSOL Conference, 17-19 November 2010 in Paris, France
Design for Reliability and Robustness through Probabilistic Methods in COMSOL Multiphysics with OptiY
The-Quan Pham, Holger Neubert, Alfred Kamusella
2nd European COMSOL Conference, 4-6 November 2008 in Hannover
Optimization of Bipolar Magnetic Actuators for Microvalves with Regard to the Tolerances
Holger Neubert, Daniel Fleischer, Alfred Kamusella, The-Quan Pham
International Conference and Exhibition on New Actuators and Drive Systems, June 2008 in Bremen
Thick Film Accelerometers in LTCC-Technology – Design Optimization, Fabrication, and Characterization
Holger Neubert, Uwe Partsch, Daniel Fleischer, Mathias Gruchow, Alfred Kamusella and The-Quan Pham
4th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies, April 2008 in Munich
Robust Design and Optimization of Thick Film Accelerometers in COMSOL Multiphysics with OptiY
Holger Neubert, Alfred Kamusella and The-Quan Pham
1st European COMSOL Conference, 23.-24. October 2007 in Grenoble, France
Toleranzanalyse und Optimierung einer Finite-Elemente-Struktur mit OptiY
The-Quan Pham
19. Deutsche Abaqus-User-Konferenz. 17.-18. September 2007. Baden-Baden.
Multidisziplinäre Zuverlässigkeits- und Robustheitsanalyse mechatronischer Systeme
The-Quan Pham, Alfred Kamusella
International Forum Mechatronics. Proceedings. 16.-17. October 2006, Linz.
Probalistische Optimierung eines Magnet-Antriebes
The-Quan Pham, Alfred Kamusella
19. Symposium Simulation Technique. Proceedings. 12.-14. September 2006, Hanover. S. 195-200